Cold Plunge Installation

Setting up your cold plunge is quick. A few things to prepare before you start:

• Foundation: filled, the tub can weigh over 2,000 lbs — place it on a concrete pad or an engineered wooden deck, never directly on dirt.
• Power: the plunge and chiller plug into a standard 120V outlet; the chiller draws about 10.5A and ideally sits on its own breaker.
• Ventilation: leave at least 3 feet of clearance behind the chiller so hot air can escape; insufficient ventilation will cause it to shut off.

The Elite & The Revive Cold Plunge

• 📄 Download the Elite & Revive installation manual (PDF)
• 📄 Download the chiller user manual (PDF)

Portable Cold Plunge Ice Bath Tub

Watch the setup video below.

If you live in a freezing climate, review the winterizing steps in the Maintenance section before your first cold season. Questions? Email info@calore.ca or call us anytime.